Home › how to cut laminate flooring planks

How To Cut Laminate Flooring Planks

Posted by pranko at 12:30 PM Post a Comment

To cut laminate flooring measure and mark the laminate s surface so you know where to cut then use a circular saw or a handsaw with at least 18 teeth per inch to make straight cuts. Line the jigsaw blade up with your guiding line.

How To Install Laminate Flooring Installing Laminate Flooring

For this step you will need a t square and a utility knife or a handsaw.

How to cut laminate flooring planks. You can cut laminate flooring with a laminate flooring cutter a circular saw table saw or jigsaw. This will ensure an even start and finish of the rows and reduce the number of rejects. Place both hands on top of the jigsaw before pulling the trigger.

Laminate flooring is always the popular choice as it is scratch resistance and offers the same warm look like real hardwood but at pocket friendly rates because the wood flooring price is low than. Like board flooring tile should be shaped in straight lines using the proper safety equipment. If you need to make curved cuts create a paper pattern first and place the pattern over the laminate to ensure accuracy when you re cutting.

Hold the long side of the second row plank at an angle and feed the tongue into the groove. Cutting laminate to length. Use a pencil or chalk to mark where the line you want to separate the board.

While the full planks of laminate can be easily cut with a circular saw making a detailed cut in a laminate board can be difficult if you don t use the proper tool and method. Wear goggles a dust mask and gloves. Laminate flooring installation tips and tricks is a cost effective and simple way to cover larger areas of your house or commercial establishment.

Place the jigsaw s base plate over the line where you re cutting. Mark the board for the cut. Measure the length required using your tape measure.

If the width is less than of a plank cut roughly of the plank in the first row. Start the second row where you started off the first. Lay your base plate against the edge of your vinyl plank near the area that you intend to cut.

Use your cutting tool to make the cut on the waste side of the line and use a damp cloth to remove. Since the fiber in laminate flooring is susceptible to water. Use the remainder of the planks you cut at the end of row one to start the next row.

How to cut laminate tile. Use the right blade and technique to avoid chipping. Place the tile on a stand or hold it steady with clamps.

Use your square and pen or pencil to create a straight line across the face of the board. Determine the width of the last row of vinyl plank flooring. Laminate flooring is a popular do it yourself project and the average homeowner can install a laminate floor as a weekend project.

Laminate Floor Molding Ideas Floor Molding Installing Hardwood